Exhaust Manifolds: Automotive, Stainless & Performance Replacements

The exhaust manifold bolts to your engine's cylinder head, collecting hot gases from each cylinder before routing them into your exhaust system. A cracked, warped, or leaking manifold causes ticking noises, power loss, and failed emissions tests, straining your catalytic converter and oxygen sensors downstream.

CBT Auto Parts stocks automotive exhaust manifolds within our Exhaust & Emission Control Parts range, including stainless and performance builds plus OEM-matched replacements, each checked against factory tolerances before listing. Every manifold pairs with the correct exhaust manifold gasket and connects cleanly to your exhaust pipes, so aftermarket never means guesswork, and fast nationwide shipping gets you back on the road quickly.

Filters

In stock (52)
Out of stock (0)

52 products

Showing 25 - 48 of 52 products

Signs Your Exhaust Manifold Needs Replacing

A failing manifold rarely fails quietly. Watch for these warning signs:

A ticking or tapping sound near the engine bay, especially right after cold starts.
A noticeably louder exhaust note that gets worse under acceleration.
A burning smell inside the cabin, caused by exhaust gas escaping near the firewall.
Reduced fuel economy or a drop in engine power.
A check engine light triggered by oxygen sensor readings thrown off by an exhaust leak.

Any one of these on its own is worth investigating. Two or more together usually point straight to a cracked manifold or a failed exhaust manifold gasket rather than a downstream issue.

Stainless vs. Performance vs. OEM: Choosing the Right Manifold Type

Not every exhaust manifold serves the same purpose, and picking the wrong category is a common, avoidable mistake.

Automotive exhaust manifold (OEM replacement): Built to match factory specifications exactly. This is the right call for a daily driver where the goal is restoring original performance, not chasing extra output.

Stainless exhaust manifold: Resists corrosion far better than mild steel, which matters most in humid climates or for vehicles that see heavy road salt exposure. Stainless builds also tend to outlast factory units by several years.

Performance exhaust manifold: Designed around improved flow, often as a header-style unit, and popular with owners running upgrades such as a Grimmspeed exhaust manifold on turbocharged platforms. These trade some low-end smoothness for gains higher in the rev range, so they suit modified builds more than stock commuters.

Manifold and Turbo Applications

On turbocharged platforms, the exhaust manifold does double duty, directing gases both into the exhaust system and toward the turbocharger itself. If you are upgrading a turbo setup rather than replacing a stock manifold, confirm whether your build calls for a manifold rated for turbo mounting, since that spec differs from a naturally aspirated replacement.

Fitment Across Platforms

Manifold shape, bolt pattern, and port spacing vary significantly by engine, which is why a listing for one platform will not bolt onto another even within the same brand's lineup. Our catalog covers a wide fitment range, including common searches like GM exhaust manifold gasket kits, H22 exhaust manifold applications, and Ford Courier exhaust manifold replacements. Always confirm your engine code, not just your vehicle's year and model, before ordering, since two trims of the same car can run entirely different engines.

Why the Gasket Matters as Much as the Manifold

A manifold is only as good as its seal. Installing a new manifold with an old, warped, or incorrectly sized gasket between the exhaust manifold and pipe reintroduces the exact leak you just paid to fix. This is especially common with GM LS exhaust manifold gasket kits, where torque sequence and gasket material both affect long-term sealing. CBT Auto Parts lists the matching exhaust manifold gasket alongside each manifold, and our separate gasket range covers replacements for manifolds, pipes, and flange connections across most makes and models.

Installation Considerations

A few practical notes before you install:

Let the engine cool fully before removing the old manifold; exhaust components retain heat far longer than most people expect.
Replace manifold bolts if they show any corrosion, since reused bolts are a common source of post-install leaks.
Torque to the manufacturer's specified sequence and value; uneven torque is one of the leading causes of premature gasket failure.
Inspect the connecting exhaust pipe section for damage while the manifold is off, since it is far easier to address at the same time.

Built for Real-World Use, Not Just the Spec Sheet

Every exhaust manifold we list sits inside CBT Auto Parts' broader Exhaust & Emission Control Parts catalog, which means it is cross-checked against the same fitment standards as our catalytic converters, oxygen sensors, and exhaust pipe ranges. That matters when a manifold replacement is only one part of a larger repair, since sourcing mismatched components from different suppliers is one of the most common causes of recurring exhaust leaks. Order what you need in one place, backed by fitment data you can actually trust, and get it shipped fast wherever you are.